Somfy Thermosunis Indoor Wirefree RTS Sensor will interact by RF with the up to 4 RTS motors.
User can choose whether sensor responds to sunlight only or both sunlight and room temperature.
Sun/thermal sensitivity can be easily adjusted, while a choice of 3 command modes, that determine which commands are sent out in clear and overcast conditions, ensures operation suits the user's requirements.
For indoor use only. Mounts to window glass or to a window sill. Up to 20 metres range. One Thermosunis Indoor Wirefree RTS is recommended to control blinds on each elevation of the property.
Helps prevent uncomfortable glare from the sun.
Controls window coverings automatically to block out heat in the summer or to utilise the sun's heat in the winter.
Protects furniture from UV rays.
Manual on/off switch to turn off sensor when not required.
Dimensions: Diameter 55.5mm Depth 19mm
Delivery: 2-3 working days
Measure the inside width of the window Recess. We would always recommend measuring the top, middle and bottom in case the recess is out of square and then using the narrowest measurement.
Measure the inside drop of the Recess. We would always recommend measuring the far left hand side, the centre and the far right hand side and then using the shortest measurement.
When Recess sizes are given Controliss Blinds will take all the nessasary adjustments to ensure you receive a perfect fitting blind.
When measuring the width decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 50mm each side although this is largely down to personal preference. Please take care to account for any obstacles that may interrupt the usage of the blind.
When measuring the drop decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 70mm above to allow for convenient fixing of the mounting brackets. The bottom overlap is very much personal preference.