24V DC Power supply capable of providing power to up to 6 motorised blinds. The Power 1 x 2.5 DC RTS has a built-in RTS receiver that allows you to control all of the connected blind motors using a Somfy RTS (RF) remote control.
Supply voltage: 198-255V AC
Frequency: 50-60 Hz
Current consumption at 24V: 18mA
Nominal current (Max.): 2.5A
Output Voltage: 24V DC
Max. motors: 4-6 (dependant on motor model used)
Protection factor: IP20
Dimensions: 155mm x 155mm x 54mm
Delivery: 2-3 working days
Measure the inside width of the window Recess. We would always recommend measuring the top, middle and bottom in case the recess is out of square and then using the narrowest measurement.
Measure the inside drop of the Recess. We would always recommend measuring the far left hand side, the centre and the far right hand side and then using the shortest measurement.
When Recess sizes are given Controliss Blinds will take all the nessasary adjustments to ensure you receive a perfect fitting blind.
When measuring the width decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 50mm each side although this is largely down to personal preference. Please take care to account for any obstacles that may interrupt the usage of the blind.
When measuring the drop decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 70mm above to allow for convenient fixing of the mounting brackets. The bottom overlap is very much personal preference.